_HISTORICAL_STATE:_  a  
- I have two PCs, two NAS devices and two SB3s networked via an
  unmanaged gigabit switch, all with hardcoded IPs using the
  192.168.168.x range.
- The SB3s are located outside of the study and take their audio feed
  from one of the NAS devices located in my study.
-  Slimserver is running on one of the PCs
- The wired link between my study and SB3s is provided by three
  Ethernet over Power connectors.
-  Each of my PCs is connected to the Internet via a broadband router
  linked to a 2nd NIC with IP assigned by the router's DHCP and takes
  the form of 192.168.1.x
-  The 192.168.168.x range is not exposed to the Internet and I want
  to keep it that way

Everything works nicely.

_DESIRED_FUTURE_STATE:_  
- Same as above, except I want to add a WAP in the lounge so that we
  can surf etc from our laptop
- If technically feasible I also want to add a 2nd WAP in the lounge
  to interact with the SB3 via a Nokia N800 or something similar

*_Current_state:_*
To solve point 1 above I did the following (after consulting with the
vendor):
    
- purchased a Wireless Ethernet over Power connector and installed in
  lounge
- connected broadband router to gigabit switch
- configured wireless Ethernet over Power connector to accept IP from
  broadband router's DHCP.  Broadband router assigns 192.168.1.2 to the
  wireless Ethernet over Power connector

Outcome is that Internet is now accessible from the Lounge, however,
devices in the the 192.168.168.x network become inaccessible to one
another as soon as the wireless connectivity is established ie it
pretty much looks like I can have the one or the other operational, but
not both.

I have connected the broadband router to the switch with and without an
Ethernet over Power connector in between - both options give me an
active WAP.

Any ideas as to how to get the two to coexist (the vendor specifically
said I could run both networks on the same power line infrastructure)?

Finally, apologies if my networking terminology is incorrect/laughable
- I've learned through trail and error.


-- 
egd

Linux and loving IT!
------------------------------------------------------------------------
egd's Profile: http://forums.slimdevices.com/member.php?userid=3425
View this thread: http://forums.slimdevices.com/showthread.php?t=34226

_______________________________________________
discuss mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/discuss

Reply via email to