Mark Lanctot;217405 Wrote: > > ...configure the IRBlaster plugin to send volume up/down signals to the > preamp when a volume up/down event happens on the Transporter. > > The Transporter will still try to respond to the volume up/down, but if > you're using the digital volume out with volume fixed nothing will > happen. > > If the preamp doesn't have a remote in, you'll have to buy an IR > Blaster. > > If you're using analog out, this won't work, unfortunately, because you > can't set analog volume fixed.
I don't think that's true about IRBlaster and analog volume control http://wiki.slimdevices.com/index.cgi?IRBlaster > The volume on the SB2/SB3/Transporter is set to a fixed value as soon as > an IR command is selected for either volume up and/or volume down. This > fixed value can be changed directly in the IR Blaster file itself if > needed. Open the Plugin.pm file with an editor and find the following > line in the 'Global variables' section: > > my $gFixedVolume = 50; # Volume set (in SB2/3) if volup or voldown is > used (max is 100) > > Change the value to your liking, save the file and restart SlimServer. And if you're not using IRBlaster, you can fix the volume at any level you'd like using my VolumeLock plugin. -Peter -- peterw http://www.tux.org/~peterw/ free plugins: http://www.tux.org/~peterw/#slim BlankSaver BottleRocket FuzzyTime SaverSwitcher SleepFade StatusFirst VolumeLock ------------------------------------------------------------------------ peterw's Profile: http://forums.slimdevices.com/member.php?userid=2107 View this thread: http://forums.slimdevices.com/showthread.php?t=37112 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
