The SB blanks it's display when it isn't/can't connect to the server. Standard diagnostics then is to first localise the problem. The problem you need to diagnose is whether it is the SB's problem or the Server's problem.
If you have a PC active at the time you could try a couple of things, use softsqueeze and see if that also has a problem and see if you can connect to the slimserver. If either of these fail then it tends to indicate a server problem if they both work and the SB still has a problem then it suggests an SB problem. However don't forget the LAN switch. If you diagnose a server or SB problem first try changing the LAN port to exclude that as an issue. Putting a PC to sleep doesn't just stop it in it's tracks. A number of things go on before it turns off power to preserve state and similarly on startup hardware is reinitialised and set up before the processing can resume from where it left off. Taking guesses before diagnosis is dangerous, but it sounds like something is causing the server to take longer to resume than normal on those occaisions. Investigating the system logs may be useful. -- Zaragon ------------------------------------------------------------------------ Zaragon's Profile: http://forums.slimdevices.com/member.php?userid=14577 View this thread: http://forums.slimdevices.com/showthread.php?t=43218 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
