Try selecting a different device option on the Devices menu. I have an Intel chipset in my laptop that appears listed as both Prism 2 & NDIS 5.1. Netstumbler only works with NDIS selected.
As an aside, I have found that Netstumbler & the SB3's own signal strength meters differ. I set mine by displaying signal strength on the SB3, then experimenting with the aerial position on the router for max signal. I found that placing the aerial horizontally significantly improved signal strength on the SB3 but had no effect on that recorded by Netstumbler. Then switch through channels one at a time & note both signal strength AND stability. On some channels found the signal strength was initially high but then dropped significantly after a minute or two. You can then compile a list of channels in order of performance. Then use Netstubler if/when you experience problems to identify other devices. You can then try other channels in order of preference from your list. Also note that some microwave ovens, among other appliances, can cause interference that won't be shown by Netstumbler. -- rbz5416 ------------------------------------------------------------------------ rbz5416's Profile: http://forums.slimdevices.com/member.php?userid=12089 View this thread: http://forums.slimdevices.com/showthread.php?t=42974 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
