Wireless repeaters can be odd devices especially as they are also working as network bridges.
What I'd guess is going on, though not sure how it might get there, is that at some point the SB3 attempts to associated with your main AP. The bridge sees that it is now on it's host side and stops communicating with it so as not to create network problems. The power cycle starts it reassociating with the repeater. I'm wondering if for some reason the SB is loosing contact with the repeater, initiating a broadcast for the SSID and getting first response from the AP. Perhaps the server logs may tell you if the SB3 is going missing. Does the repeater have a management interface that you can look at to see what it thinks is where or any logs it might keep? If you are unable to resolve the problem then I'd suggest turning it into a straight AP and link it back into the network with a Homeplug type device (assuming you are repeating because you can't get a cat5 to it's position). -- Zaragon ------------------------------------------------------------------------ Zaragon's Profile: http://forums.slimdevices.com/member.php?userid=14577 View this thread: http://forums.slimdevices.com/showthread.php?t=43181 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
