The blue light on the receiver indicates that it can't see SqueezeCentre. Once you have set up the receiver for wireless access, which was successful, then plugging in an ethernet cable has no effect as it is ignored. To configure for ethernet plug in the cable and then re-set it up. Hold the button until flashing red then reconfigure with the controller.
The receiver and the SqueezeCentre find each other using a broadcast mechanism, as does the SB2. Broadcasts are limited to the subnet. It seems that the receiver and SqueezeCentre are on different subnets. However, since the controller found the SC the same way and then gave that same config to the receiver I'm a little puzzled as to why they can't see each other. Not sure how you have your subnets configured and what security you have between them. Have you blocked the receiver in some way where the controller isn't? -- Zaragon ------------------------------------------------------------------------ Zaragon's Profile: http://forums.slimdevices.com/member.php?userid=14577 View this thread: http://forums.slimdevices.com/showthread.php?t=45174 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss