Hi Scott, 

is it the same for both the ppc iMac G5 and the intel
G5?

Mark
--- Scott Howell <[EMAIL PROTECTED]> wrote:

> Yes it is on the bottom. You can locate this at the
> center of the  
> machine, its held on by two screws, but they are a
> little tricky to  
> feel as its a vent cover as the entire bottom of the
> machine is a  
> vent. Its two philip screws which hold it on.
> 
> Scott
> [EMAIL PROTECTED]
> 
> 
> 
> On Sep 16, 2007, at 10:06 PM, Josh de Lioncourt
> wrote:
> 
> >
> > I believe the old iMacs could only have two GB of
> memory, that being  
> > two 1GB modules.  The new iMac should be able to
> handle up to 4GB,  
> > that is two 2GB modules.  Some computer hardware
> does not allow  
> > mixing and matching of 1 and 2 GB modules, etc.  I
> don't know if the  
> > iMac specificly will or not.  I do not know where
> the compartment is  
> > to install the memory, as I don't have one.  I
> think I read  
> > somewhere that it was on the bottom edge, but that
> may be wrong.
> >
> > Josh de Lioncourt
> > [EMAIL PROTECTED]
> >
> > ...my other mail provider is an owl...
> >
> >
> >
> > On 16 Sep 2007, at 18:45, Dane Trethowan wrote:
> >
> >> Ok, I just want to confirm something. Is it true
> that the Imac can  
> >> only take 3 gig of memory, the 1 gig chip which
> is already  
> >> installed plus another 2 gig chip or can you have
> 2 2 gig chips.
> >> Second, where is the memory door to gain access
> to the memory? The  
> >> manual tdescribes this but doesn't exactly tell
> you where it is.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ******************************
> >>
> >>
> >> Dane Trethowan
> >>
> >> From Melton Victoria Australia
> >>
> >> Email [EMAIL PROTECTED]
> >>
> >> phone uk 0121 288 4976
> >>
> >> Phone/tty (+61 3) 9747 975
> >>
> >> Fax +61 3 9743 7954
> >>
> >> mobile/sms: +61425 777 508
> >>
> >> Skype: callto:grtdane12
> >>
> >> MSN: [EMAIL PROTECTED]
> >> ******************************
> >>
> >>
> >>
> >>
> >> --------------------------------
> >>
> >> Join the fight against spam!  Have your ISP
> enable client/server  
> >> authentication.
> >>
> >> --------------------------------
> >>
> >>
> >
> 
> 
> 


Reply via email to