Hi William.
I'm sorry. I don't have any ideas.
Regarding your other questions:
Yu can press fn backspace to activate the delete key. To enter the
tasc manager, you can press ctrl shift escape.
Regarding shift f10, I'm wandring why it doesn't work. I haven't
disabled any options, and it works on my virtual machine. You can use
a nice little program called sharp key to map an applications key and
an insert key. On my system, I have mapped the right option key as the
insert key, and the right command key as the applications key.
Best regards
Søren Jensen
Mail & MSN:
[EMAIL PROTECTED]
Website:
http://www.coolfortheblind.dk/
On 05/10/2008, at 14.54, william windels wrote:
hello, Soren,
thx for your suggestion.
unfortunately, it seems not to work :(
This can have 2 reasons:
or my virtual machine is damaged because of some broke vmware scripts
or, because I have turned off the mac shortcuts in the vmware prefs.
I did this because otherwise I can't use the shift-f10 command to
activate the contextmenu in windows.
I need this to delete files since there is only a kind of bakspace
key on the mac keyboard.
If this is the case, I can also use ctrl+x to delete.
Also , you need also the del-key to activate the taskmanager in
windows.
Is there a solution for that?
best regards,
William Op 5-okt-08, om 12:53 heeft Søren Jensen het volgende
geschreven:
Hi William.
When you have switched to full screen, you can just turn Voiceover
off by pressing command f5. Your Windows will go into the start
menu, but you can just get out of it again. When Voiceover is
turned off, you should be able to use your braille display in
Windows.
Best regards
Søren Jensen
Mail & MSN:
[EMAIL PROTECTED]
Website:
http://www.coolfortheblind.dk/
On 04/10/2008, at 23.55, william windels wrote:
Hi all,
Is here somebody that works with a brailledisplay and vm-fusion ?
I have problems to use my brailledisplay in the windows
environment on my mac.
I think, it's because voiceover is still using it.
What I do:
I start my image after opening vm fusion.
Windows starts and the screenreader begins to speak.
At that moment, the braille of voiceover is still on the screen.
so, I press ctrl+option+enter to have full scren.
When this goes well, I can go to the menu of window eyes and
select the right brailledisplay.
After done this, I should have windows-braille on my display but...
It seems that voiceover is still driving my braille display.
I know , I can stop voiceover before activating full screen but
then it's much more difficult to go to the right window to
activate full screen and it doesn't work all the time.
Also, when I plug out the usb-kabel and put it in again, voiceover
is still driving the display even if I was in full-screen mode
while voiceover was on.
So, is there a way to start your braille display under vm fusion
(with window eyes)?
thanx alot,
best regards,
William
