I have a machine with 6 ethernet card inside.
I want to test the configuration you have in the site
http://openvswitch.org/?page_id=146 with the only difference that i dont
need the Management Network Cloud.
My configuration
ETH0: br0 with ports --tap0 (tag=1)
--tap1 (tag=2)
--eth0
ETH1:br1 with ports --tap2 (tag=1)
--tap3 (tag-2)
--eth1
Now you say that the ports that data network connects the 2 hosts (in my
case the two interfaces) must be configured as VLAN trunks. By default ovs
does that but how do i connect the two interfaces over a virtual switch ?
Should I use virtual interfaces like eth1:1 eth2:1 or something like that ?
Any ideas ?
Thanks in advance.
+-------------+ +--------------+
| tap0 tap1 | | tap2 tap3 |
| | | | | | | |
| ovs-daemon | | ovs-daemon |
| | | | | |
| eth0 | | eth1 |
+-------------+ +--------------+
\ /
\ /
\ /
\ /
\ /
+-------------+
| |
| DataNet |
| |
+-------------+
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss_openvswitch.org
