On Wed, Jan 26, 2011 at 8:58 PM, Jesse Gross <[email protected]> wrote:
> On Tue, Jan 25, 2011 at 11:17 PM, Ramana Reddy <[email protected]> > wrote: > > The drivers are tg3 (broadcom) and via-rhine (Dlink 1Gb NIC). > > I am using ubuntu 10.10 where I installed OVS 1.0.0. > > Both of those drivers should be fine. Can you post the output of > ovs-dpctl show and ovs-dpctl dump-flows <BRIDGE> on the receive side > while pinging? > The output: $ sudo ovs-dpctl show system@dp0: flows: cur:2, soft-max:512, hard-max:262144 ports: cur:3, max:1024 groups: max:16 lookups: frags:0, hit:139, missed:46, lost:0 queues: max-miss:100, max-action:100 port 0: br0 (internal) port 1: eth0 port 2: eth1 $sudo ovs-dpctl dump-flows br0 tunnel00000000:in_port0001:vlan10:pcp0 mac00:25:b3:5d:5e:a9->ff:ff:ff:ff:ff:ff type0806 proto1 tos0 ip10.0.0.1->10.0.0.2 port0->0, packets:76, bytes:4560, used:0.390s, actions:0,2 tunnel00000000:in_port0002:vlan10:pcp0 mac00:25:b3:5d:5e:40->00:25:b3:5d:5e:a9 type0806 proto2 tos0 ip10.0.0.2->10.0.0.1 port0->0, packets:76, bytes:4560, used:0.389s, actions:1 driver tg3 , version: 3.102 driver via-rhine, version : 1.4.3 Thanks, Ramana Reddy.
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss_openvswitch.org
