sorry, sorry,
the right command is
/root@NOX:/usr/local/openvswitch-1.1.0pre2# ./configure
--with-l26=/usr/src///linux-headers-2.6.32-30-generic
/i missunderstood build directory
now i've finished installation process
thanks Ramana Reddy for your help :-)
On 20/03/2011 16:18, Hilman Fathurrahman wrote:
sorry, i still get error message
at first try, i completed *./configure* process but i got error at
*make* process
so i decided to delete the folder openvswitch-1.1.0pre2 and extract
openvswitch-1.1.0pre2.tar.gz again
but now i get the error message :
/root@NOX:/usr/local/openvswitch-1.1.0pre2# ./boot.sh/
/root@NOX:/usr/local/openvswitch-1.1.0pre2# ./configure
--with-l26=/lib/modules/openvswitch
--with-l26-source=/usr/src/linux-headers-2.6.32-30-generic/
.
/(skipped)/
.
/checking for Linux 2.6 build directory... /lib/modules/openvswitch/
/checking for Linux 2.6 source directory... configure: error:
/usr/src/linux-headers-2.6.32-30-generic is not a kernel source
directory)/
I try to reinstall /linux-headers-2.6.32-30-generic, /but still get
the same error
thanks for your help :-)
On Sun, Mar 20, 2011 at 3:37 PM, Ramana Reddy <[email protected]
<mailto:[email protected]>> wrote:
It will also work, if u remove the $ and brackets then the `uname
-r` is needed.
So, Both are same:
sudo apt-get install linux-headers-$(uname -r)
*sudo apt-get install linux-headers-`uname -r`*
On Sun, Mar 20, 2011 at 2:02 PM, Hilman Fathurrahman
<[email protected] <mailto:[email protected]>> wrote:
thanks for fast reply
now it works :-)
small correction for the command
*sudo apt-get install linux-headers-`uname -r`*
On Sun, Mar 20, 2011 at 3:25 PM, Ramana Reddy
<[email protected] <mailto:[email protected]>> wrote:
Please install linux headers with the following command:
sudo apt-get install linux-headers-$(uname -r)
Some times, the headers will be installed in
/usr/src/linux-headers-2.6.x.x
instead of /lib/modules/..........
Please verify that and give the corresponding path when
you install openvswitch.
On Sun, Mar 20, 2011 at 1:48 PM, Hilman Fathurrahman
<[email protected] <mailto:[email protected]>> wrote:
i want to build openvswitch-1.1.0pre2 kernel module
in ubuntu 10.04.2 LTS
but i got error messages :
/root@NOX:/usr/local/openvswitch-1.1.0pre2#
<mailto:root@NOX:/usr/local/openvswitch-1.1.0pre2#>
./configure --with-l26=/lib/modules/`uname -r`
.
/-skipped-/
.
checking for Linux 2.6 build directory...
/lib/modules/2.6.32-30-generic
checking for Linux 2.6 source directory... configure:
error: cannot find source directory (please use
--with-l26-source)/
i found the problem is the installer can't find the
source,
so i want to ask where is the Linux 2.6 source directory ?
thanks for your help :-)
_______________________________________________
discuss mailing list
[email protected] <mailto:[email protected]>
http://openvswitch.org/mailman/listinfo/discuss
--
Hilman Fathurrahman
Teknik Telekomunikasi 07
Institut Teknologi Bandung
/HP : +62 838 2132 0101
Email : i[at]hil-man.net <http://hil-man.net>/
_______________________________________________
discuss mailing list
[email protected] <mailto:[email protected]>
http://openvswitch.org/mailman/listinfo/discuss
--
--
Hilman Fathurrahman
Teknik Telekomunikasi ITB
/i[at]hil-man.net
+6283821320101/
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
