I want to isolate the traffic of the interfaces. I want to use vswitch to do so. Is there any possibility that i can isolate the interfaces using OVS?
My idea was to implement VLAN as done in documentation of OVS (Configuration codebook -> VLANs). But I can not use virtual machines. Ahmed Bilal On Sat, Apr 30, 2011 at 11:19 AM, Justin Pettit <[email protected]> wrote: > Why do you think Bridge0 should not be able to ping Bridge1? It looks to > me like they're all connected at the wireless router. In your original > message, you mentioned VLANs, but I don't see them in the description you > just gave. > > --Justin > > > On Apr 29, 2011, at 10:36 PM, ahmad numan wrote: > > > <myimage.JPG> > > > > Above is the topology of my network. I configured the Laptop A with > Bridge0 and add two physical interfaces to it. On Laptop B it added two > interfaces to separate bridges. Interface at Bridge1 should not ping the > interfaces at Bridge0 but it is pinging. My configuration is as follows > > Configuration > > ------------------- > > After installing the open vswitch > > > > ovsdb-tool create /usr/local/etc/ovs-vswitchd.conf.db > vswitchd/vswitch.ovsschema > > > > ovsdb-server /usr/local/etc/ovs-vswitchd.conf.db > --remote=punix:/usr/local/var/run/openvswitch/db.sock > --remote=db:Open_vSwitch,managers --private-key=db:SSL,private_key > --certificate=db:SSL,certificate --bootstrap-ca-cert=db:SSL,ca_cert --detach > > > > ovs-vsctl --no-wait init > > > > ovs-vswitchd unix:/usr/local/var/run/openvswitch/db.sock --detach > > > > ovs-vsctl add-br bridge0 > > > > ovs-vsctl add-port bridge0 eth1 > > > > similarly i added bridges and ports to bridges. > > > > Note > > ------ > > I don't use virtual machines > > > > I think there is something missing in configuration. Please help me > > thanks > > > > Ahmed Bilal > > > > > > > > On Sat Ar 32011 at 3:39 AM, Ben Pfaff <[email protected]> wrote: > > On Sat, Apr 30, 2011 at 12:55:32AM +0500, ahmad numan wrote: > > > I am experimenting with OVS but having unexpected results. I > interconnect > > > two Laptops having *eth0* and *wlan0* interfaces using a wireless > router. > > > Each interfacing is pinging the other. Now i configured the OVS > according to > > > "INSTALL.Linux" and tutorial for setting VLAN in OVS documentation. On > one > > > laptop i *added two interfaces to bridge0* and other laptop *one > interface > > > is added to bridge0 and other interface is added to bridge1*. The > interface > > > added to bridge1 should not ping the interfaces of other laptop > interfaced > > > that are added to bridge0. But they are pinging. please help me out > where i > > > am wrong. > > > > I don't understand this description. I could guess about what it > > really is, but maybe you could show us a little more explicitly? For > > example, you could draw an ASCII art diagram or you could describe the > > path of a packet from one end to another. > > > > _______________________________________________ > > discuss mailing list > > [email protected] > > http://openvswitch.org/mailman/listinfo/discuss > >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
