Is there a way to programmatically assign a tun/tap to a specific port.
I have a bridge with only 3 interfaces attached but two of the
interfaces are on ports 15 and ports 16 ... instead of port 2 and 3. If
i take these down and add two new interfaces, I believe they will go to
ports 17 and 18.
I have attached output from from ovs-ofctl for the bridge.
sudo ovs-ofctl show br0
OFPT_FEATURES_REPLY (xid=0x1): ver:0x1, dpid:0000362a4853dfb4
n_tables:1, n_buffers:256
features: capabilities:0x87, actions:0xfff
1(eth0.1750): addr:00:26:b9:88:91:57
config: 0
state: 0
current: 1GB-FD COPPER AUTO_NEG
advertised: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD AUTO_NEG
supported: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
15(vnet0): addr:fe:20:20:20:20:24
config: 0
state: 0
current: 10MB-FD COPPER
16(vnet1): addr:fe:20:20:20:20:21
config: 0
state: 0
current: 10MB-FD COPPER
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
