Hi Dongsheng, Could you please tell me, why do we need to clear up the eth1 IP address? Does it interfere with the bridge ? If yes then how ? Bridge management is a bit unclear to me so thats why I am asking.
Thanks, Salman > From: [email protected] > Date: Fri, 18 May 2012 10:32:23 +0800 > To: [email protected] > CC: [email protected] > Subject: Re: [ovs-discuss] why vm can't ping host eth1 > > On Thu, May 17, 2012 at 7:12 PM, yue wang <[email protected]> wrote: > > > > i think vm1/vm2/host are connected to each other by OVS, vm and host should > > communicate with each other. > > Sure, please see another thread: > http://openvswitch.org/pipermail/discuss/2012-May/007201.html > > You must clean ALL ip address on eth1, and set the ip address on the > corresponding bridge device, > say 'br1', here is a example: > > /usr/bin/ovs-vsctl add-br br1 > /usr/bin/ovs-vsctl add-port br1 eth1 > > /sbin/ip addr add ${IP} dev br1 > /sbin/ip link set br1 up > /sbin/ip address flush dev eth1 > /sbin/ip route replace default via ${GW} # if you have gateway > corresponding eth1 > _______________________________________________ > discuss mailing list > [email protected] > http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
