Hello, please show output of 'ovs-ofctl dump-flows br0'
maybe you do not setup any flows? On May 25, 2012, at 9:40 PM, Volkan YAZICI wrote: > Hi! > > After sleepless >48 hours, I might be missing something obvious > but I could not make an OVS 1.4.1 switch working on a particular > machine. Below are the diagnostics. > > --8<---------------cut here---------------start------------->8--- > $ lsmod | grep openv > openvswitch_mod 52448 1 > > $ ps afx | grep sbin/ovs > 1557 ? Ss 0:00 /home/vyazici/usr-openvswitch/sbin/ovsdb-server > --remote=punix:/home/vyazici/usr-openvswitch/var/run/openvswitch/db.sock > --remote=db:Open_vSwitch,manager_options --detach > > $ ~/usr-openvswitch/bin/ovs-vsctl show > c69614a4-5a84-4f85-abe2-d1228614a592 > Bridge "br0" > fail_mode: standalone > Port "eth1" > Interface "eth1" > Port "br0" > Interface "br0" > type: internal > Port "eth3" > Interface "eth3" > Port "eth2" > Interface "eth2" > > $ sudo ~/usr-openvswitch/sbin/ovs-vswitchd > May 25 > 21:42:21|00001|reconnect|INFO|unix:/home/vyazici/usr-openvswitch/var/run/openvswitch/db.sock: > connecting... > May 25 > 21:42:21|00002|reconnect|INFO|unix:/home/vyazici/usr-openvswitch/var/run/openvswitch/db.sock: > connected > May 25 21:42:21|00003|bridge|INFO|created port eth1 on bridge br0 > May 25 21:42:21|00004|bridge|INFO|created port eth2 on bridge br0 > May 25 21:42:21|00005|bridge|INFO|created port eth3 on bridge br0 > May 25 21:42:21|00006|bridge|INFO|created port br0 on bridge br0 > May 25 21:42:21|00007|ofproto|INFO|using datapath ID 0000002320c75427 > May 25 21:42:21|00008|ofproto|INFO|datapath ID changed to 0000000000000001 > > $ sudo ethtool eth1 > Settings for eth1: > Supported ports: [ TP MII ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Advertised pause frame use: No > Advertised auto-negotiation: Yes > Link partner advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Link partner advertised pause frame use: No > Link partner advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: MII > PHYAD: 0 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: pumbg > Wake-on: g > Current message level: 0x00000033 (51) > Link detected: yes > > $ sudo ethtool eth2 > Settings for eth2: > Supported ports: [ TP MII ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Advertised pause frame use: No > Advertised auto-negotiation: Yes > Link partner advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Link partner advertised pause frame use: No > Link partner advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: MII > PHYAD: 0 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: pumbg > Wake-on: g > Current message level: 0x00000033 (51) > Link detected: yes > --8<---------------cut here---------------end--------------->8--- > > On eth1 and eth2, there are two notebooks connected to the switch > machine. And their network interfaces are set to 192.168.4.1/24 > and 192.168.4.2/24. Further, connected NIC lights on the switch > machine are green. But notebooks somehow cannot ping each other. > What might I be missing? > > > Best. > _______________________________________________ > discuss mailing list > [email protected] > http://openvswitch.org/mailman/listinfo/discuss _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
