Sorry when I said _above_ I want to mean _bellow_ (the case of: #ovs-vsctl set Interface eth1 ingress_policing_rate=1000 #ovs-vsctl set Interface eth1 ingress_policing_burst=100).
Citando mvpb...@iol.pt:
Hello again I tried like this: sudo ovs-ofctl add-flow br0 actions=NORMAL sudo ovs-ofctl show br0 : This will give me the port numbers for the enqueue action. #Add tc root and classes sudo ovs-vsctl -- set port eth1 qos=@newqos -- --id=@newqos create qos type=linux-htb other-config:max-rate=10000000 queues=0=@q0,1=@q1,2=@q2 -- --id=@q0 create queue other-config:min-rate=720000000 other-config:max-rate=6000000 -- --id=@q1 create queue other-config:min-rate=0 other-config:max-rate=5000000 -- --id=@q2 create queue other-config:min-rate=0 other-config:max-rate=4000000 #Add ofctl rules sudo ovs-ofctl add-flow br0 priority=65500,in_port=LOCAL actions=enqueue:2:0 And doing this I have OK rate limitation at egress. So Why the configuration above does no work? Its a bug? Regards Marco Citando mvpb...@iol.pt:Hello, I have follow the guide that you said but the problem maintains. This is my steps: #ovs-vsctl set bridge br0 datapath_type=netdeV #ovs-vsctl add-port br0 eth0 #ovs-vsctl add-port br0 eth1 I have created birdge br0 with eth0 and eth1 under it. #sudo ovs-vsctl list-ports br0 eth0 eth1 I try to aply this rate-limit: #ovs-vsctl set Interface eth0 ingress_policing_rate=1000 #ovs-vsctl set Interface eth0 ingress_policing_burst=100 and also this: #ovs-vsctl set Interface eth1 ingress_policing_rate=1000 #ovs-vsctl set Interface eth1 ingress_policing_burst=100 Do someone see something wrong? Is possible to do this using an QoS policy instead of this interface rate limit? Can someone give me some example? Regards, Marco Citando Luiz Ozaki <luiz.oz...@locaweb.com.br>:On 8/20/12 1:06 PM, mvpb...@iol.pt wrote:I try to aply this rate-limit: #ovs-vsctl set Interface eth0 ingress_policing_rate=1000 #ovs-vsctl set Interface eth0 ingress_policing_burst=100 and also this: #ovs-vsctl set Interface eth1 ingress_policing_rate=1000 #ovs-vsctl set Interface eth1 ingress_policing_burst=100 I have apply first to eth0 after to eth1 and also in eth0 and eth1. I test with iper, with NetStress and also with an ftp file transference. But this is not limiting the rate, why?Well, are you doing the FTP between the VMs inside the same host ? (just to be sure) If you are, you need to make the QoS on the VMs bridges/tap. Try look here too: http://openvswitch.org/support/config-cookbooks/qos-rate-limiting/ -- Luiz Henrique Ozaki
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
