On Tue, Sep 4, 2012 at 8:17 AM, Fabio Fantoni <[email protected]>wrote:
> I have installed openvswitch on Wheezy 64 bit and configured bridge with > /etc/network/interfaces. > > Single bridge on one interface working: > On /etc/network/interfaces: > ------------------------------**----------------- > allow-ovs xenbr0 > iface xenbr0 inet dhcp > ovs_type OVSBridge > ovs_ports eth0 > > allow-xenbr0 eth0 > iface eth0 inet manual > ovs_bridge xenbr0 > ovs_type OVSPort > ------------------------------**----------------- > ifup --allow=ovs xenbr0 > > > Bonding with 2 interfaces not working: > On /etc/network/interfaces: > ------------------------------**----------------- > allow-ovs xenbr0 > iface xenbr0 inet static > address 192.168.1.30 > netmask 255.255.255.0 > network 192.168.1.0 > broadcast 192.168.1.255 > gateway 192.168.1.200 > ovs_type OVSBridge > ovs_ports bond0 > > allow-xenbr0 bond0 > iface bond0 inet manual > ovs_bridge xenbr0 > ovs_type OVSBond > ovs_bonds eth0 eth1 > ovs_options bond_mode=balance-tcp lacp=active > ------------------------------**----------------- > ifup --allow=ovs xenbr0 > > xenbr0 and bond0 went up without error but system network is not working > (for example I can't ping from the system), probably there is something > wrong or missing in network/interfaces configuration, I don't know exactly, > is first time I use openvswitch. If you do a "ifconfig eth0" and "ifconfig eth1", they are probably down? Does manually upping them help? > > Each one done following the examples of openvswitch-switch.README.**Debian > > Thanks for any reply > > > ______________________________**_________________ > discuss mailing list > [email protected] > http://openvswitch.org/**mailman/listinfo/discuss<http://openvswitch.org/mailman/listinfo/discuss> >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
