Hello,
I was prepared to write this email with examples of how to reproduce the issue,
yet when I tried to do so I was unable. However, I do have the output of the
original case that triggered the process in my terminal session so will report
it regardless. However, perhaps this should just be a heads-up at this point.
When deleting a port using ovs-vsctl del-port the DPID for my OVS 1.8.90
changed. Can that be confirmed as incorrect behavior? When adding the same
port back to the switch with ovs-vsctl add-port the DPID changed back to the
original.
Thanks for any insight,
Jeff
Original DPID:
ovs-ofctl show br0
OFPT_FEATURES_REPLY (xid=0x1): dpid:0000000c2960af02
n_tables:255, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST
SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
1(eth1): addr:00:0c:29:60:af:b2
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
2(eth2): addr:00:0c:29:60:af:bc
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
3(eth7): addr:00:0c:29:60:af:ee
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
4(eth8): addr:00:0c:29:60:af:f8
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
5(eth5): addr:00:0c:29:60:af:da
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
7(eth6): addr:00:0c:29:60:af:e4
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
8(eth9): addr:00:0c:29:60:af:02
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
9(eth3): addr:00:0c:29:60:af:c6
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
13(eth4): addr:00:0c:29:60:af:d0
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
LOCAL(br0): addr:00:0c:29:60:af:02
config: PORT_DOWN
state: LINK_DOWN
speed: 100 Mbps now, 100 Mbps max
OFPT_GET_CONFIG_REPLY (xid=0x3): frags=normal miss_send_len=0
ovs-ofctl del-port br0 eth9
ovs-ofctl show br0
OFPT_FEATURES_REPLY (xid=0x1): dpid:0000000c2960afb2
n_tables:255, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST
SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
1(eth1): addr:00:0c:29:60:af:b2
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
2(eth2): addr:00:0c:29:60:af:bc
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
3(eth7): addr:00:0c:29:60:af:ee
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
4(eth8): addr:00:0c:29:60:af:f8
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
5(eth5): addr:00:0c:29:60:af:da
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
7(eth6): addr:00:0c:29:60:af:e4
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
9(eth3): addr:00:0c:29:60:af:c6
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
13(eth4): addr:00:0c:29:60:af:d0
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
LOCAL(br0): addr:00:0c:29:60:af:b2
config: PORT_DOWN
state: LINK_DOWN
speed: 100 Mbps now, 100 Mbps max
OFPT_GET_CONFIG_REPLY (xid=0x3): frags=normal miss_send_len=0
ovs-vsctl add-port br0 eth9
ovs-ofctl show br0
OFPT_FEATURES_REPLY (xid=0x1): dpid:0000000c2960af02
n_tables:255, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST
SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
1(eth1): addr:00:0c:29:60:af:b2
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
2(eth2): addr:00:0c:29:60:af:bc
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
3(eth7): addr:00:0c:29:60:af:ee
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
4(eth8): addr:00:0c:29:60:af:f8
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
5(eth5): addr:00:0c:29:60:af:da
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
7(eth6): addr:00:0c:29:60:af:e4
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
9(eth3): addr:00:0c:29:60:af:c6
config: 0
state: 0
current: 10GB-FD COPPER
advertised: COPPER
supported: 1GB-FD 10GB-FD COPPER
speed: 10000 Mbps now, 10000 Mbps max
13(eth4): addr:00:0c:29:60:af:d0
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
19(eth9): addr:00:0c:29:60:af:02
config: 0
state: 0
current: 1GB-FD COPPER
advertised: COPPER
supported: 1GB-FD COPPER
speed: 1000 Mbps now, 1000 Mbps max
LOCAL(br0): addr:00:0c:29:60:af:02
config: PORT_DOWN
state: LINK_DOWN
speed: 100 Mbps now, 100 Mbps max
OFPT_GET_CONFIG_REPLY (xid=0x3): frags=normal miss_send_len=0
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
