I think because of thanksgiving, you may have missed this email. Just to remind, and thanks in advance.
-- Best regards, Can Zhang Forwarded message: > From: can. <[email protected]> > To: [email protected] > Date: 2012年11月23日Friday下午12:41:01 > Subject: How to configure ovs properly? > > Hello, > > Yesterday I encountered "bridge module is loaded, not loading brcompat" error > (http://openvswitch.org/pipermail/discuss/2012-November/008446.html), and I > solved it by not setting a "bridge_port eth0" in /etc/network/interfaces. > Here's the file now: > > ---- > auto eth0 > iface eth0 inet static > address 0.0.0.0 > > > auto br0 > iface br0 inet dhcp > > > ## bridge_port eth0 ## removed this > > > > auto virbr0 > iface virbr0 inet dhcp > > > ---- > > and this is `ovs-vsctl show`: > ---- > Bridge "virbr0" > Port "virbr0" > Interface "virbr0" > type: internal > Port vethfFrrKy > Interface vethfFrrKy > > > > > Bridge "br0" > Port "eth0" > Interface "eth0" > Port "br0" > Interface "br0" > type: internal > ovs_version: "1.7.1" > > > ---- > It seems working well, only that the "network device configuration" time at > startup is very long. I guess this is related to virbr0, the default libvirt > virtual bridge, which doesn't get the configuration. > > > > Also you might notice that eth0 is connected to br0, and these two > configurations as shown are not conform.(So first question, is there a > cleaner way to configure ovs? I tried the instructions in > openvswitch-switch.README.Debian, but didn't work. btw I'm using ubuntu 12.04) > > And since virbr0 doesn't get enough configuration, it's isolated from the > Internet. So how to make both br0 and virbr0 connect to the Internet? I think > I can connect virbr0 to br0 but don't know how. And to be more generally, can > I create arbitrary topologies inside ubuntu using ovs? > > -- > Best regards, > Can Zhang > _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
