Please keep this on the list.
Yes, moving the IP address to the bridge is covered in the FAQ:
http://openvswitch.org/faq/
If you want to bridge the traffic, I imagine you want to attach something else
to the bridge, like another interface such as eth1.
--Justin
On Dec 10, 2012, at 12:58 AM, Игорь Рыжов <[email protected]> wrote:
> Thank you for answer. I installed OVS, then:
> ovs-vsctl add-br br0
>
> ovs-vsctl add-port br0 eth0
> and my internet connection disappeared.
> I found that i can put my IP on br0 (ifconfig br0 10.20.9.7) and remove IP
> from eth0 (ifconfig eth0 0.0.0.0) but it didn't solve the problem. Can you
> help me with that?
>
>
> 2012/12/10 Justin Pettit <[email protected]>
> That works fine. You can just create a bridge and then attach your physical
> devices to it (e.g., eth0 and eth1). OVS doesn't really make a distinction
> between physical and virtual interfaces.
>
> --Justin
>
>
> On Dec 9, 2012, at 10:57 PM, Игорь Рыжов <[email protected]> wrote:
>
> > The standart use of OVS is to connect host adapters with OVS and connect
> > OVS with virual machines adapters. But I want to use OVS as a layer between
> > host and host's adapters. I didn't find anything about this way of OVS use.
> > Can anybody explain how to do that or provide some links?
> > _______________________________________________
> > discuss mailing list
> > [email protected]
> > http://openvswitch.org/mailman/listinfo/discuss
>
>
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
