On Mon, Dec 17, 2012 at 12:22:21AM +0100, Endre Karlson wrote: > Hi, is this feasable to do? I'm trying to run some servers inside of a ESXi > host that uses a OpenvSwitch with VLAN tagged ports. I've tagged the port > group with 4095 in the ESXi host and then inside the VM I do: > ovs-vsctl add-br br-virtual > ovs-vsctl add-port br-virtual eth1 > ovs-vsctl add-port br-virtual vlan61 tag=61 -- set Interface vlan61 > type=internal > ifconfig vlan61 172.16.59.X/24 > > But if I try to get traffic going on the vlan61 interface all I can get > going is L2 traffic, L3 is jammed. And I know there's hosts there that's up > and running because I have 2 physical nodes on the same VLAN using the > method described above and they work perfectly. > > Though the funny bit is if I setup the VLAN interface using > vconfig add eth1 61 > ifconfig eth1.61 172.16.59.X/24
Did you read the VLAN section of the FAQ? _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
