Hi ,

I am facing the issues in multi bridge topology :

First issue faced :
1)    I have created 2 bridges of different subnet br0 and  br1 on the same
machine
2)    Two Virtual machines acting as two controllers  vm1 and vm2.
3)    Now br0 is added to VM1  and br1 is added to VM2 (br0 and VM1 are of
same subnet and same applies to br1 and VM1)
4)    Now when I add flow entry on br1 through the controller the flow
entry shows that is added to controller on VM1 but on switch side the flow
entry is added to br0 when I do dump-flows br0.


And the second issue faced is :
1)    I have created 2 bridges of different subnet br0 and  br1 on the same
machine
2)    1 Virtual machine acting as a NOX controller  have two interfaces
eth0 and eth1 of different subnets.
3)     Now br0 is added to eth0  and br1 is added to eth1  (br0 and eth0
are of same subnet and same applies to br1 and eth0)
4)    When I start the NOX controller both the controllers don’t come in
ACTIVE state. The state of the controllers toggle between BACKOFF to ACTIVE

Regards
Sonia Bargla
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to