-------- 转发邮件信息 --------
发件人：neuhuanghaijun <neuhuanghai...@163.com>
发送日期：2013-09-28 18:07:13
收件人："Reid Price" <rpr...@nicira.com>
主题：Re:Re: Re: [ovs-discuss] about ovs
hi:
thank to your answer！
i want ro send all tarffic to firewall, the firewall to do something
according to strategy.My configure is wrong, can u write some flows .
my configure is flow:
xenbr0:
eth0
=================attach to internet
tap(1.0)
vif(1.0)
tap(1.1)
vif(1.1)
==================firewall's ports
tap(2.0)
vif(2.0)
==================windows xp port
At 2013-09-27 05:13:04,"Reid Price" <rpr...@nicira.com> wrote:
If you are just trying to solve your problem (and not using this as a test of
OVS) you might want to just add another interface to the firewall and do two
networks in XenServer.
VM ----[firewall network]--- Firewall ---[external network]--- eth0
What you described above sends all traffic to the firewall, does the firewall
attempt to send traffic elsewhere afterwards? You may have configuration
issues on that end.
-Reid
On Thu, Sep 26, 2013 at 4:02 AM, neuhuanghaijun <neuhuanghai...@163.com> wrote:
hi:
i want to config the ovs to add flow for making a vm's traffic through
another vm(the firewall),what should i do?
my configure is the flow:
i have
1 xenserver6.2
xenserver6.2 has 1 vm(windows xp) and 1 vm(the firewall)
xenserver has 1 NIC
the vm(windows xp) has 1 vif and tap base the NIC and the vm(firewall) too.
xenserver has a xenbr0 base ovs
the xenbr0 'configure is flow;
1(eth0)
2(vif1.0)
3(tap1.0)
4(vif2.0)
5(tap2.0)
2,3 port belong the vm(windows xp)
4,5 port belng the firewall
now ,i need to config the ovs,i wanna know what i should do?
w run a command: ovs-ofctl add-flow xenbr0 in_port=3,actions=output:5
but it is not right, i test the flow, i find the windows xp can ping the
firewall success,but can't ping the xenserver or other ip success
i guess i'm wrong ,so ,i hope someone can help me!
thanks!
At 2013-09-26 05:33:20,"Reid Price" <rpr...@nicira.com> wrote:
Hi there,
I think you will have to describe what you want more carefully, perhaps by
including a diagram of the components and desired vs current behavior.
-Reid
On Tue, Sep 24, 2013 at 7:57 PM, huanghj <neuhuanghai...@163.com> wrote:
-------- 原始邮件 --------
主题：[ovs-discuss] about ovs
发件人：huanghj <neuhuanghai...@163.com>
收件人：discuss@openvswitch.org
抄送：
hi all:
i want to configure ovs at xenserver. It has 1 NIC, 2 vm and 1 filewall ,i
want to make vm's network traffic through the FW to forward,what should i do?
i add a flow:
in_Port=4,6 actions=output:2,
is it OK?
i am a new guy ,i hope get answer.
thanks！
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
