On Wed, Oct 09, 2013 at 03:46:37PM +0530, Shyam Goud wrote:
> Like RSPAN with vlan below, is there any way to configure the same
> for vxlan traffic on openvswitch ?
The FAQ explains how to mirror to a GRE tunnel. VXLAN would be similar.
Q: How do I configure mirroring of all traffic to a GRE tunnel?
A: The following commands configure br0 with eth0 and tap0 as trunk
ports. All traffic coming in or going out on eth0 or tap0 is also
mirrored to gre0, a GRE tunnel to the remote host 192.168.1.10; any
traffic arriving on gre0 is dropped:
ovs-vsctl add-br br0
ovs-vsctl add-port br0 eth0
ovs-vsctl add-port br0 tap0
ovs-vsctl add-port br0 gre0 \
-- set interface gre0 type=gre options:remote_ip=192.168.1.10 \
-- --id=@p get port gre0 \
-- --id=@m create mirror name=m0 select-all=true output-port=@p \
-- set bridge br0 mirrors=@m
To later disable mirroring and destroy the GRE tunnel:
ovs-vsctl clear bridge br0 mirrors
ovs-vcstl del-port br0 gre0
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
