Thanks Vasu. It worked when I program the flows from OpenDaylight to OVS2.0 and
I could see the flows as well in the switch.
But,when I try to replicate the same thing from OpenDaylight to OVS1.12 and I
am not able to see the flows in the switch.
Have you seen this issue before?
Thanks,
Madhusudhan
On Thursday, February 6, 2014 9:46 AM, Vasu Dasari <[email protected]> wrote:
Can you try this?
sudo ovs-ofctl add-flow br0 \
in_port=13,dl_dst=00:00:00:00:00:13,dl_type=0x800,nw_dst=11.1.1.0/24,dl_vlan=201,actions=push_mpls:0x8847,set_field:100-\>mpls_label,mod_vlan_vid:20,mod_dl_src:00:00:00:00:00:14,mod_dl_dst:00:00:00:00:00:04,output:14
On Wed, Feb 5, 2014 at 7:41 PM, Madhusudhan Kandadai
<[email protected]> wrote:
Hello,
>
>
>I am not sure whether this question has resolved. If you think this is the
>repeated question, I appreciate if you can point me to the right person.
>
>
>I actually trying to add a flow for MPLS (Push MPLS type and set MPLS label)
>
>
>sudo ovs-ofctl add-flow s2
>in_port=1,dl_type=0x0800,dl_src=22:11:11:11:11:11,dl_dst=22:00:00:00:00:00,actions=push_mpls:0x8847,set_mpls_label:10,output:2
> -O OpenFlow13
>
>
>
>It is throwing me an error:
>ovs-ofctl: Unknown action: set_mpls_label
>
>
>
>But, I try to add a flow without using set_mpls_label:10, i.e.,
>
>
>sudo ovs-ofctl add-flow s2
>in_port=1,dl_type=0x0800,dl_src=22:11:11:11:11:11,dl_dst=22:00:00:00:00:00,actions=push_mpls:0x8847,output:2
> -O OpenFlow13
>
>
>sudo ovs-ofctl dump-flows s2 -O OpenFlow13OFPST_FLOW reply (OF1.3) (xid=0x2):
> cookie=0x0, duration=8.422s, table=0, n_packets=0, n_bytes=0,
>ip,in_port=1,dl_src=22:11:11:11:11:11,dl_dst=22:00:00:00:00:00
>actions=push_mpls:0x8847,output:2
>
>
>OVS version used here is :2.0
>
>
>Thanks,
>Madhusudhan
>_______________________________________________
>discuss mailing list
>[email protected]
>http://openvswitch.org/mailman/listinfo/discuss
>
>
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
