Thx Justin for your prompt response!Actually, I connected them using crossover, but what do I need to assign as an IP address for the NIC that is in the desktop (running as OVS switch) when I am connecting that NIC to another desktop's NIC (running as a host). Thanks.
> Date: Fri, 14 Feb 2014 11:24:36 -0800 > Subject: Re: [ovs-discuss] Basic OVS connectivity > From: [email protected] > To: [email protected]; [email protected] > > It depends on your NICs. Most modern NICs will automatically take care of > the cross-over, so you don't need a special cable or switch/hub. > > --Justin > > > On 2/14/14, 10:46 AM, "tyler derden" <[email protected]> wrote: > > >Hello,I just have a question about the basic connectivity of OVS. I > >installed OVS on a an ubuntu desktop that has 3 NICs, I want to connect > >one of the NICs to another desktop ( running as openflow Controller) and > >the other 2 NICs to two desktops ( running as Hosts ). So I just connect > >each NIC with the other NIC on the other desktop directly using a > >cross-over cable or I need a switch/hub in between. > > > > > >Thank you in advance! > > > >_______________________________________________ > >discuss mailing list > >[email protected] > >http://openvswitch.org/mailman/listinfo/discuss > >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
