hi
> if you don¹t have an OOB nic and don¹t script moving the IP from ethX to
> brX it will clip you connection :)
>
> Configure a bridge and add eth0 to the new bridge:
> --------------------------------------------------
> sudo ovs-vsctl add-br br0
> ovs-vsctl add-port br0 eth0
> ovs-vsctl list port
>
> Change your eth(n) IP to your new bra interface:
> ------------------------------------------------
> ifconfig eth0 0
> ifconfig br0 x.x.x.x netmask 255.255.255.0
> route add default gw 192.168.1.1 br0
thanks Brent. this is what I am doing it seems to work. I guess I was missing
the default gw??
>>> Am I correct in assuming that setting IP address to the bridge is
>>>enough for what I am trying or is there a better way?
>>I don't know what your setup looks like. As far as I can tell you
>>haven't told us much about it.
nothing much. I have bridge br0 to which I have attached eth0.. I just wanted
that anything to the bridge will be handled normally as eth0 would. I guess I
should have followed the DHCP thing in the FAQ more closely
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
