Hi all,
I understand that might be a question more related to the controller, but at
this point, i am not sure.
So, basically, i have such a configuration:
-------- ---------
----------------
| A | -eth0--> eth0 -| B | -eth4 ----- LAN ------eth4 | Controller |
-------- ---------
-----------------
node A and B are 2 ovs-switch.... I can get both A and B to connect to the
controller, but the controller, in my case OpenDaylight, does not draw a line
between A and B... meaning it doens't know they are connected together,
right?.... how can we have both connected?
If i had a br0:1 interface on A with the LAN subnet that is between B and the
controller, it shows that br0:1 address as a host connected to B for that
address.
Anyone knows why it doesn't see a link between A and B or why it sees br0:1 as
a host? Does anyone know how the controller determines if 2 nodes are connected
to each other (in my case I would expect it to see that eth0 in br0 of A is
connected to eth0 in br0 of B)... maybe by knowing that i could fix that up ...
thanks,
sam
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
