OK. Thank you so much. *Best Regards！*
*Chao Yan--------------**My twitter：Andy Yan @yanchao727 <https://twitter.com/yanchao727>* *My Weibo：http://weibo.com/herewearenow <http://weibo.com/herewearenow>--------------* 2014-06-23 13:35 GMT+08:00 Han Zhou <zhou...@gmail.com>: > Hi, > > With standalone bridge you can receive broadcast packets on all > ports/interfaces on the same bridge. Think it as a real switch. > You can also check learned mac table with command: > # ovs-appctl fdb/show brbm > > Best regards, > Han > > On Sun, Jun 22, 2014 at 9:09 AM, 严超 <yanchao...@gmail.com> wrote: > > Hi, all: > > > > I've got some problem with arp broadcasting. > > > > Can all interfaces in a same port receive ARP packets when there are > > packages in an interface? Like below, if vnet1 receives arp packets, can > > eth0 receives them too ? Now I can receive in eth0, why ? > > > > yanchao@yanchao727:~/tripleo$ sudo ovs-vsctl show > > ccf96a8f-ee49-40dd-a27e-8e72fe8e540e > > Bridge brbm > > Port brbm > > Interface brbm > > type: internal > > Port "vnet1" > > Interface "vnet1" > > type: internal > > Port "eth0" > > Interface "eth0" > > type: internal > > ovs_version: "1.4.6" > > > > > > Best Regards！ > > Chao Yan > > -------------- > > My twitter：Andy Yan @yanchao727 > > My Weibo：http://weibo.com/herewearenow > > -------------- > > > > _______________________________________________ > > discuss mailing list > > discuss@openvswitch.org > > http://openvswitch.org/mailman/listinfo/discuss > > >
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
