Hi Guys,
I am facing an issue wrt the del-port command here. Refer to my config here:
Commands used:
ovs-vsctl add-port OVS-VlanBridge vnet96
ovs-vsctl set port vnet96 tag=5
ovs-vsctl add-port OVS-VlanBridge eth3
[root@ kvm ~]# ovs-vsctl show
412338cc-eca8-4ea0-a4d8-793ec0444d23
Bridge OVS-VlanBridge
Port OVS-VlanBridge
Interface OVS-VlanBridge
type: internal
Port "eth3"
Interface "eth3"
Port "vnet96"
tag: 5
Interface "vnet96"
The port vnet96 is connected to a vm interface which provides outside access
to the vm for VLAN 5.
The eth3 port is the physical port on the host connected to the outside world.
It acts as a trunk with no trunk tags specified, hence being a VLAN all trunk
port.
Ifconfig output on the host :
[root@ kvm ~]# ifconfig | grep eth3
eth3 Link encap:Ethernet HWaddr 0C:C4:7A:12:33:27
eth3.5 Link encap:Ethernet HWaddr 0C:C4:7A:12:33:27
The eth3.5 is automatically created by the OVS. If however I delete the eth3
from OVS-VlanBridge using the del-port command the eth3.5 is not cleaned up. Do
I need an additional command to clean this up? Or is this an bug?
[root@ kvm ~]# ovs-vsctl --if-exists del-port eth3
[root@ kvm ~]# ifconfig | grep eth3
eth3 Link encap:Ethernet HWaddr 0C:C4:7A:12:33:27
eth3.5 Link encap:Ethernet HWaddr 0C:C4:7A:12:33:27
Regards,
Madhur Sethi
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
