The br0 interface is labeled with LOCAL in bridge show table, How can I use it in the flow-rules. When wrote LOCAL I got an error saying LOCAL is not numerical value.
Best regards, Amer من جهاز الـ iPhone الخاص بي في ٢٣ جما١، ١٤٣٦ هـ، الساعة ٨:٠٩ م، كتب Amer <[email protected]>: > nano /etc/network/interfaces > auto br0 > Inface br0 inet static > address 192.168.56.4 > netmask 255.255.255.0 > ..... > > then in the host > gateway 192.168.56.4 > > Thank you > > Ben Pfaff <[email protected]>: > >> No. >> >> The local port is the port with the same name as the bridge itself. >> >>> On Sat, Mar 14, 2015 at 07:11:42PM +0300, Amer wrote: >>> Do you want me to give one of the Ethernet interfaces an IP address= the >>> bridge IP, without assigning this interface to the bridge. >>> >>> Best regards, >>> Amer >>> >>> م، كتب Ben Pfaff <[email protected]>: >>> Well, like you said, without flows, ping works. So pass through the >>>> ICMP traffic to the gateway to the IP stack (presumably the bridge's >>>> local port) and let it do the ICMP responses. >>>> >>>>> On Sat, Mar 14, 2015 at 06:40:10PM +0300, Amer wrote: >>>>> Thank you Ben >>>>> The problem is the host need to have a gateway, however, if he can't ping >>>>> the gateway, nothing will be forwarded. >>>>> However, how can I pass the ICMP packets to the IP stack? >>>>> >>>>> Best regards, >>>>> Amer >>>>> >>>>> : >>>>> >>>>>>> On Sat, Mar 14, 2015 at 02:29:07PM +0300, Amer wrote: >>>>>>> I have 4 VMs, 2 bridges and each one has a host. >>>>>>> My question is: >>>>>>> I need to configure a default gateway for the hosts, however when I >>>>>>> added flow rules to the bridges, suddenly, I can't ping them from the >>>>>>> hosts. I know this is due to the rules. >>>>>>> When the host can't ping the bridge, how I configure it to be the >>>>>>> gateway. >>>>>>> I need to add a flow-rule to make the bridge respond to ping requests? >>>>>>> What is the rule to do so? >>>>>> >>>>>> I don't think you can do that through flows. It is probably better to >>>>>> configure the flows so that anything that needs an ICMP response is >>>>>> passed through to the IP stack. > _______________________________________________ > discuss mailing list > [email protected] > http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
