> -----Original Message----- > From: discuss [mailto:[email protected]] On Behalf Of Daniele > Di Proietto > Sent: Tuesday, May 19, 2015 11:37 AM > To: 钢锁0310 > Cc: 通天晓0280; discuss > Subject: Re: [ovs-discuss] For help : failed to bind I217-LM to ovs-dpdk > > > > On 19/05/2015 10:24, "钢锁0310" <[email protected]> wrote: > > > > > > >I setup ovs-dpdk by following INSTALL.DPDK.md > > > > > >[root@25 tools]# ./dpdk_nic_bind.py --status > > > >Network devices using DPDK-compatible driver > >============================================ > >0000:00:19.0 'Ethernet Connection I217-LM' drv=igb_uio unused=vfio-pci > > > > > >crw------- 1 root root 247, 0 May 19 17:07 /dev/uio0 uio0 > >is ok > > > > > > > >but > > > > > >[root@25 tools]# ovs-vsctl add-port br0 dpdk0 -- set Interface dpdk0 > >type=dpdk > >ovs-vsctl: Error detected while setting up 'dpdk0'. See ovs-vswitchd log > >for details. > > > > Could you post the content of the ovs-vswitchd log? > > > > > > >i had bound 02:01.0 Ethernet controller: Intel Corporation 82545EM > >Gigabit Ethernet Controller (Copper) (rev 01) > > to ovs earlier and that is ok > > > > > >so i realy want to know what is wrong with binding I217-LM > >to ovs it does not to be support?
There's a list of NICs supported by DPDK here http://dpdk.org/doc/nics > > > > > > > >********************* > >RTFSC > >********************* > > > > > > > > _______________________________________________ > discuss mailing list > [email protected] > http://openvswitch.org/mailman/listinfo/discuss _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
