Retrying. Did anyone face same issue?
On Thu, Jun 11, 2015 at 4:25 PM, kunapaneni prashanth <[email protected]> wrote: > Hello, > i am trying SPAN in openvswitch 2.3.0, by mirroring source traffic of > oct0 to output on port oct1. > > After i start traffic, i can see packets in oct1. While traffic is > running, i cleared the mirror. But still see mirroring happening. > Mirroring stops only after i stop and start traffic again. is this a > bug? > > > Mirror creation: > > ovs-vsctl -- set Bridge br0 mirrors=@m -- --id=@h0 get Port oct0 -- > --id=@h1 get Port oct1 -- --id=@m create Mirror name=mymirror > select-src-p > ort=@h0 output-port=@h1 > dc075662-e0f6-406f-a8e6-142ccbbdc287 > ~ # > > Flows with mirroring: > > ~ # ovs-dpctl dump-flows > recirc_id(0),skb_priority(0),in_port(3),eth(src=00:0f:b7:84:e6:d8,dst=00:0f:b7:84:39:6a),eth_type(0x0800),ipv4(src=10.10.10.2/0.0.0.0,dst=10.10.10.3/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), > packets:123380, bytes:12091240, used:0.000s, actions:2 > recirc_id(0),skb_priority(0),in_port(2),eth(src=00:0f:b7:84:39:6a,dst=00:0f:b7:84:e6:d8),eth_type(0x0800),ipv4(src=10.10.10.3/0.0.0.0,dst=10.10.10.2/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), > packets:123380, bytes:12091240, used:0.000s, actions:3,4 > > > Mirror delete: > #ovs-vsctl clear bridge br0 mirrors > > > Flows after mirror clear > ~ # > ~ # ovs-dpctl dump-flows > recirc_id(0),skb_priority(0),in_port(3),eth(src=00:0f:b7:84:e6:d8,dst=00:0f:b7:84:39:6a),eth_type(0x0800),ipv4(src=10.10.10.2/0.0.0.0,dst=10.10.10.3/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), > packets:127517, bytes:12496666, used:0.000s, actions:2 > recirc_id(0),skb_priority(0),in_port(2),eth(src=00:0f:b7:84:39:6a,dst=00:0f:b7:84:e6:d8),eth_type(0x0800),ipv4(src=10.10.10.3/0.0.0.0,dst=10.10.10.2/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), > packets:127517, bytes:12496666, used:0.001s, actions:3,4 > ~ # > > > ~ # ovs-dpctl show > system@ovs-system: > lookups: hit:84810774 missed:6330 lost:0 > flows: 2 > masks: hit:84819861 total:1 hit/pkt:1.00 > port 0: ovs-system (internal) > port 1: br0 (internal) > port 2: oct0 > port 3: poct0 > port 4: oct1 > > > Thanks, > Prashanth _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
