Hi, I dont understand.
eth2 is my VM port. And i have added that to the OVS bridge "mybridge" Am i missing something? Thanks, Abhishek On Wed, Jul 8, 2015 at 8:50 AM, Jesse Gross <[email protected]> wrote: > On Tue, Jul 7, 2015 at 8:11 PM, Abhishek Verma > <[email protected]> wrote: > > Hi, > > > > I want to test OVS between two virtual machines hosted over the same > host. I > > created an OVS bridge where i added the NIC that connects the two VMs and > > used ifconfig to assign an IP address to the bridge port. > > > > With this i am able to ping the two VMs. > > > > root@VirtualBox:/home/akabra# ovs-vsctl show > > e71e7608-7bfe-4293-ac5a-8705355ba16e > > > > Bridge mybridge > > Port mybridge > > Interface mybridge > > type: internal > > Port "eth2" > > Interface "eth2" > > root@VirtualBox:/home/akabra# > > > > root@VirtualBox:/home/akabra# ifconfig > > eth2 Link encap:Ethernet HWaddr 08:00:27:7b:2d:b2 > > inet6 addr: fe80::a00:27ff:fe7b:2db2/64 Scope:Link > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > RX packets:1074400 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:1000 > > RX bytes:1003962152 (1.0 GB) TX bytes:363441 (363.4 KB) > > > > mybridge Link encap:Ethernet HWaddr 08:00:27:7b:2d:b2 > > inet addr:2.2.2.2 Bcast:2.2.2.255 Mask:255.255.255.0 > > inet6 addr: fe80::c8f8:7cff:fe8a:5b4a/64 Scope:Link > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > RX packets:36387 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:3160 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > > RX bytes:8220698 (8.2 MB) TX bytes:340708 (340.7 KB) > > > > I did exactly the same on the other VM and am able to ping between the > two > > VMs. > > You need to add the VM ports to OVS. Currently only traffic between > eth2 and the hypervisor host is going through OVS. >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
