Answers to the following questions may help narrow the issue down further. What's the output of 'ovs-appctl bond/show" and 'ovs-appctl lacp/show' ? Does it work without bond port configuration? Does it work with a different bond mode configuration, such as active-backup?
On Wed, Jul 8, 2015 at 5:32 AM, yas nak <[email protected]> wrote: > Hi Forum > > I am really new to OVS and trying to understand. I am trying to get LACP > bonding to work on Ubuntu 14.04 and cisco switch. > > I have configured the cisco 2960CG switch with the following config > interface Port-channel1 > switchport mode trunk > ! > interface GigabitEthernet0/1 > switchport mode trunk > channel-protocol lacp > channel-group 1 mode active > ! > interface GigabitEthernet0/2 > switchport mode trunk > channel-protocol lacp > channel-group 1 mode active > > On my Ubuntu x64 14.04.02 server I have installed openvswitch-switch. I > have configured /etc/network/interfaces as > > > auto lo > iface lo inet loopback > > auto p2p1 > iface p2p1 inet manual > > auto p3p1 > iface p3p1 inet manual > # > # OVS Bridge > # > auto vmbr0 > iface vmbr0 inet manual > ovs_type OVSBridge > ovs_ports bond0 vlan1 > > allow-vmbr0 bond0 > iface bond0 inet manual > ovs_bridge vmbr0 > ovs_type OVSBond > ovs_bonds p2p1 p3p1 > ovs_options bond_mode=balance-tcp lacp=active other_config:lacp-time=fast > other_config:trunks=1 > > allow-vmbr0 vlan1 > iface vlan1 inet dhcp > ovs_type OVSIntPort > ovs_bridge vmbr0 > ovs_options tag=1 > > I can see using tcpdump -i p2p1 that the DHCP request is being responded on > my PC but VLAN1 never gets an IP assigned to the interface VLAN1 > > Could someone point me towards what I have configured incorrectly? > > Thanks > > Yas > > _______________________________________________ > discuss mailing list > [email protected] > http://openvswitch.org/mailman/listinfo/discuss > _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
