Hi, I'm attempting to test a workload over OVS. Currently I can run the workload without OVS, with the following network configuration:
Host1: eth1.1000 (192.168.0.10) => eth1 Host2: eth1.1000 (192.168.0.20) => eth1 Both hosts have an interface configured to perform VLAN tagging. From host1 I can ping 192.168.0.20 and visa versa. I tried to setup an OVS bridge on host2, so I removed eth1.1000 and did the following: # Create the bridge ovs-vsctl add-br br-eth1 # Add the port ovs-vsctl add-port eth1 # Create a veth pair ip link add veth0 type veth peer name veth1 # Plug veth1 into the switch ovs-vsctl add-port veth1 # Configure IP on veth0 ifconfig veth0 192.168.0.20 # Add tagging to the port ovs-vsctl set port veth1 tag=1000 Running: ping -I veth0 192.168.0.10 shows the destination is unavailable. Any suggestions on whats wrong here? How can I configure the setup? Thanks _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
