Did you check ovs-appctl dpctl/show to see tunnel port configurations?
On Tue, Oct 13, 2015 at 1:49 PM, Rajesh Chawla <[email protected]>
wrote:
> Hi folks,
>
>
>
> I’m struggling to set up a simple STT connection between 2 nodes.
>
> I see a reasonable setup using ovs-vsctl show (see below), but when I try
> to
>
> ping using the bridge, I get the following error in the log file:
>
>
>
> 2015-10-13T18:31:49.492Z|00005|tunnel(handler4)|WARN|receive tunnel port
> not found
> (arp,tun_id=0x64,tun_src=10.106.15.34,tun_dst=10.106.15.30,tun_gbp_id=0,tun_gbp_flags=0,tun_tos=0,tun_ttl=63,csum|key,in_port=2,vlan_tci=0x0000,dl_src=ae:bb:cc:5e:15:48,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=10.1.2.1,arp_tpa=10.1.2.100,arp_op=1,arp_sha=ae:bb:cc:5e:15:48,arp_tha=00:00:00:00:00:00)
> 2015-10-13T18:31:49.492Z|00006|ofproto_dpif_upcall(handler4)|INFO|received
> packet on unassociated datapath port 2
> 2015-10-13T18:31:52.492Z|00007|ofproto_dpif_upcall(handler4)|INFO|received
> packet on unassociated datapath port 2
>
>
>
> Any pointers on where to look to troubleshoot this?
>
>
>
> Regards,
>
> Rajesh
>
>
>
>
>
> $ sudo ovs-vsctl show
>
> 0d282c54-21c2-4217-b8e6-ef3e58267e01
>
> Bridge "br0"
>
> Port "br0"
>
> Interface "br0"
>
> type: internal
>
> Port "stt0"
>
> Interface "stt0"
>
> type: stt
>
> options: {key=flow, remote_ip="129.144.28.49"}
>
> ovs_version: "2.4.0"
>
>
>
> $ sudo ovs-vsctl show
>
> 3ab12299-e790-4b33-8e73-7ee7eb25d398
>
> Bridge "br0"
>
> Port "stt0"
>
> Interface "stt0"
>
> type: stt
>
> options: {key=flow, remote_ip="129.144.27.61"}
>
> Port "br0"
>
> Interface "br0"
>
> type: internal
>
> ovs_version: "2.4.0"
>
>
>
> _______________________________________________
> discuss mailing list
> [email protected]
> http://openvswitch.org/mailman/listinfo/discuss
>
>
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
