Hi, I noticed that my Ethernet frames are dropped when their input ports are the same as their output ports. Even though I have the right rule installed on to Open vSwitch bridge from my controller, they still get dropped.
Here is the output from ovs-ofctl: $ sudo ovs-dpctl dump-flows NXST_FLOW reply (xid=0x4): cookie=0xa0000b648a713, duration=30.453s, table=0, n_packets=30, n_bytes=2940, idle_age=0, priority=10,in_port=1,dl_src=a0:ce:c8:03:2f:bf,dl_dst=a0:ce:c8:02:e9:e1 actions=output:1 And here is the output from ovs-dpctl: $ sudo ovs-dpctl dump-flows recirc_id(0),in_port(3),eth(src=a0:ce:c8:03:2f:bf,dst=a0:ce:c8:02:e9:e1),eth_type(0x0800),ipv4(src= 0.0.4.0/0.0.4.0,dst=0.0.4.0/0.0.4.0,frag=no), packets:17, bytes:1666, used:0.711s, actions:drop Since I need an implementation which allows input port and output port of the frame to be the same, I wonder where I can make those frames not get dropped but sent out from their incoming port. Best, Hans
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
