sorry I would not want to send the mail but I click on Send...
I confirm that ovs-ofctl add-flow vswitch_rspan
priority=500,in_port=8,actions=mod_vlan_vid:888,output:7
is working
I had an issue on VirtIO driver on my VM...
thanks!
On 12/21/15 09:38, Benoît wrote:
Hi,
I am trying to add VLAN tag on flow (the original packets don't have
VLAN) but I am not sure of the command...
I have found this in the documentation
mod_vlan_pcp:vlan_pcp
Modifies the VLAN priority on a packet. The VLAN tag is
added or modified as necessary to match the value speci‐
fied. Valid values are between 0 (lowest) and 7 (high‐
est). If the VLAN tag is added, a vid of zero is used
(see the mod_vlan_vid action to set this).
I have tried :
ovs-ofctl add-flow vswitch_rspan
priority=500,in_port=8,actions=mod_vlan_vid:888,output:7
but I am not seeing the VLAN id.
I found another command type but I got an error.
ovs-ofctl add-flow vswitch_rspan
priority=500,in_port=8,actions=push_vlan:0x8100,set_field:0-\>vlan_vid,output:7
ovs-ofctl: none of the usable flow formats (OXM,OpenFlow11) is among
the allowed flow formats (OpenFlow10,NXM)
Is there another way to add vlan, or do I make mistake doing like this?
Normally I am able to read and see vlan when I do port mirroring on
openvswitch, here I need to add the vlan on a flow.
Is there a difference when using port mirroring where the destination
port accept the vlan by default?
I tried to change my output port (on the flow) on trunk and
native-untagged but same result..
Many thanks,
belette
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
