It looks like you're doing everything right so I'm confused.
Is the kernel module for htb loaded?
On Mon, Jul 25, 2016 at 09:05:55PM +0000, álvaro wrote:
> I've just checked the logs and i didn't see nothing weird.
>
> I thing that maybe I've not added queues in the qos.
>
> When I check with ovs-vsctl list queue appears this:
>
> mininet@mininet-vm:~$ sudo ovs-vsctl list queue
>
> _uuid : 5dcd4bc4-4706-4e30-86b1-dc2c2a13f499
>
> dscp : []
>
> external_ids : {}
>
> other_config : {max-rate="1000000000", min-rate="1000000000"}
>
>
> _uuid : 4f688828-a5e7-4d15-8aed-9193b0742610
>
> dscp : []
>
> external_ids : {}
>
> other_config : {max-rate="4000000", min-rate="4000000"}
>
>
> _uuid : a8546246-3b5f-40b1-8433-0733203740bf
>
> dscp : []
>
> external_ids : {}
>
> other_config : {max-rate="4000000", min-rate="4000000"}
>
>
> _uuid : f7a521ce-0031-47e3-8412-25b5babde47e
>
> dscp : []
>
> external_ids : {}
>
> other_config : {max-rate="20000", min-rate="5000"}
>
> but when I put ovs-ofctl queue-stats s1 it says that there are 0 queues maybe
> because I didn't add.
> I don't know very well how to configure a queue, how would you do from
> scratch?
> Thanks again
>
> ________________________________
> From: Ben Pfaff <b...@ovn.org>
> Sent: Monday, July 25, 2016 8:18 PM
> To: álvaro
> Cc: discuss@openvswitch.org
> Subject: Re: [ovs-discuss] Queue stats don't appear
>
> That looks OK to me. You might check your OVS logs for related
> warnings.
>
> On Mon, Jul 25, 2016 at 07:06:42PM +0000, álvaro wrote:
> >
> > Yes I did, with this command:
> >
> > ovs-vsctl -- set Port s1-eth1 qos=@newqos --
> >
> > --id=@newqos create QoS type=linux-htb other-config:max-rate=1000000000
> > queues=0=@q0 --
> >
> > --id=@q0 create Queue other-config:min-rate=4000000
> > other-config:max-rate=4000000
> >
> >
> > and when I check with:
> >
> > sudo ovs-vsctl list queue
> >
> > appears the uuid of the queues and the configuration that I've chosen, but
> > when I try to get the stats either with the:
> >
> > ova-ofctl queue-stats or with the QueueStatsReceived method from POX
> > nothing appears.
> >
> > I don't know if I've configured the queue in the correct way, if you can
> > tell me how should I configure the queue of a port switch to get the stats
> > like tx_byte, tx_packet, tx_error I would appreciate.
> >
> >
> > ________________________________
> > From: Ben Pfaff <b...@ovn.org>
> > Sent: Monday, July 25, 2016 4:24 PM
> > To: álvaro
> > Cc: discuss@openvswitch.org
> > Subject: Re: [ovs-discuss] Queue stats don't appear
> >
> > On Mon, Jul 25, 2016 at 10:17:19AM +0000, álvaro wrote:
> > > Hi, I'm trying to get the queue stats of the network, I make a request to
> > > the controller and use the QueueStatsReceived with a handler, but when I
> > > print the stats nothing appears(even saturating switch ports), with the
> > > FlowStats and PortStats works normally.
> > >
> > > Anyone knows why always appear "[]" without stats in?
> >
> > Did you configure queues?
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
