Cool. And yes that is exactly what I was thinking, will have to take a look and
see what else I'll need if any. Is there a format I can save for everyone to
view or do they have a viewer, for the revit format? Want it as easily
accessible to everyone as possible.
--- Original Message ---
From: "Craig Bergdorf" <[email protected]>
Sent: January 7, 2014 3:38 AM
To: "SYN/HAK discussion list" <[email protected]>
Subject: Re: [SH-Discuss] Scale Drawing of the new space
Everything that was measured is in there, (other than the toilet), Thanks
to Devin and Tiki for help measuring. If your thinking 3d model of the
space, that would be wonderful. Most of the recorded measurements are in
the draft drawing (and at least 7 sheets of paper with conflicting
numbers).
On Tue, Jan 7, 2014 at 2:59 AM, Steve Radonich IV <[email protected]>wrote:
> Can't wait to take a look at this. Do you have more measurements written
> down? I have a legit copy of Autodesk Revit 2008 that I'd love to put to
> use.
>
> --- Original Message ---
>
> From: "Craig Bergdorf" <[email protected]>
> Sent: January 7, 2014 2:52 AM
> To: "SYN/HAK discussion list" <[email protected]>
> Subject: [SH-Discuss] Scale Drawing of the new space
>
> Resent due to not being able to attach the file, so here it is:
> http://calculais.com/syn/jan_syn.zip
>
>
>
> Attached (hopefully) is a zip of various formats of a rough scale
> drawing of the new space. I haven't had any time lately, so... sorry, but
> hey it beats pen on napkin right? It should make routing wires and pipes
> much easier too.
>
> :a few notes:
> The measurements aren't perfect, and corners were cut for things to line
> up without having to pay attention to wall thickness and various wall
> angles (the basement is slightly narrower at one end irl). It's a bit
> sloppy, but everything is within an inch or three.
>
> Files:
> Native format is .des (Designer after Corel ruined the series)
> The pdf files are formatted for a single page for easy
> printing/clipboard attaching/writing on/angrily pointing at while talking
> to others.
> It is drawn in 1" to 1' scale (not by choice) ,but there is a 1' cal box
> in the top right if it's an issue.
>
> New version: (not important)
> I'm sick of having to run my ol' trusty program in an XP VM, so i'm
> learning a 10-year newer version, and it kinda sucks & i'm still learning
> where everything was moved to. Drawings are over simplified (no sinks,
> waterheater, layers, gradients, etc), but if I don't send this out right
> now I may actually do it right, and deliver sometime in June when nobody
> needs it anymore.
> With the 1" to 1' scale, in syncalled, some are actual inches, some are
> 12/1, again - must be emailed now.
> Also on syncalled, they are what the program saw after lining stuff up,
> not as measured, so when designing, just round down and add an inch or two
> for jello (there's always room)
>
> Also:
> Blue is a doorway, and the number inside of it is the max width that can
> go through it, including removing trim where possible.
>
> If you want another format, or a sandwich, let me know,
> <3
>
> _______________________________________________
> Discuss mailing list
> [email protected]
> https://synhak.org/mailman/listinfo/discuss
>
_______________________________________________
Discuss mailing list
[email protected]
https://synhak.org/mailman/listinfo/discuss
_______________________________________________
Discuss mailing list
[email protected]
https://synhak.org/mailman/listinfo/discuss
