On Sun, Dec 5, 2010 at 08:29, Uwe Dippel <[email protected]> wrote:
> On 12/05/2010 02:50 PM, Juan José Díaz Vecchio wrote: > >> I can confirm this, it just happens once on each reboot, after the boot >> process is complete. There is a service that restarts the connection? or >> maybe something is touching the usb0 interface on the final stages of the >> boot process? >> > > I have no clue if this is the same case that I have here. Though I know why > it happens here: When I boot and reconnect it, with ifconfig usb0 ..., it > works for some seconds and then freezes totally. The reason here is the > dhcp, it finds usb0, some Ethernet-over-USB, and though it is set, it still > tries dhcp, throws out the set usb0. Once it has noticed that it cannot dish > out an address, it behaves properly, and allows me to set the IP-address for > good. My worksround is simply, to wait a minute after the connection, before > I do the manual settings. > If this is your problem you might want to set the network details in /etc/config/network (especially "option proto static"), that way you don't need to do ifconfig manually each time, but also, it shouldn't be overridden. Bart
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
