The link in the last wget in the "Creating an OpenWRT installation on your SD card" section had to add .bz2 at the end in order to not get a file not found error. see below
wget http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND/latest/openwrt-xburst-qi_lb60-root.ubi.bz2 This was found and downloaded. Now I am in the To re-flash the rootfs section and the command ubiformat /dev/mtd2 -f openwrt-xburst-q lb60-root- ubi is getting the error message: ubiformat /dev/mtd2 -f openwrt-xburst-q lb60-root- ubi -ash: $: not found What do I need to do to finish this installation? I need help. Bob
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): discussion@lists.en.qi-hardware.com Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): discussion@lists.en.qi-hardware.com Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): discussion@lists.en.qi-hardware.com Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
