On Wednesday 05 January 2011, Xiangfu Liu wrote:
> On 01/06/2011 06:51 AM, Lars-Peter Clausen wrote:
> >> Hi
> >>
> >> The kernel has only support for up to 7 partions. You can change this by
> >> setting
> >> CONFIG_MMC_BLOCK_MINORS
> >> to a higher number and recompile the kernel.
> >>
> >> - Lars
> >>
> Hi Lars
>
> by searching a little of this option:
> this option is only support in 2.6.37. the most partitions of MMC in 2.6.32
> is 8.
>
> --
> Best Regards
> Xiangfu
Thanks for sorting this out. I only needed 8 partitions to do some
I/O speed tests but was able to do it with only four partitions. I suspect
at the time the limit was set, the capacity of the devices for that
interface was much smaller than now:) I am now using a 16GB, Cat 4,
Micro SD card. There are 32GB cards but only at Cat 2 and quite
expensive.
Delbert
_______________________________________________
Qi Hardware Discussion List
Mail to list (members only): [email protected]
Subscribe or Unsubscribe:
http://lists.en.qi-hardware.com/mailman/listinfo/discussion
