Hi Wolfgang Lars
images at: http://fidelio.qi-hardware.com/~xiangfu/compile-log/openwrt-xburst.full_system-02132011-0750-without-gottet-supertux/ http://downloads.qi-hardware.com/people/xiangfu/images/ steps: 1. erase all nand 2. flash images 3. boot nanonote twice 4. start nanonote by press 'RESET' hole kernel rootfs time ------------------------------------------------ OpenWrt show up|"wait while load openwrt" show up|gmenu2x show up | poweroff time outside ubifs 512MB 03.120 | 08.415 | 21.862 | 04.319 03.424 | 07.991 | 22.811 | 03.946 03.518 | 07.823 | 22.686 | 03.818 outside ubifs 2.0GB 03.511 | 14.597 | 29.730 | 03.998 03.505 | 14.717 | 30.024 | 04.058 inside ubifs 512MB 06.463 | 11.464 | 25.821 | 03.878 06.527 | 11.047 | 26.023 | 03.978 inside ubifs 2.0GB 12.785 | 23.729 | 38.916 | 06.877 12.757 | 26.480 | 38.794 | 05.595 *outside mean uImage at nand kernel partition. u-boot will load 2M from nand. *inside mean uImage at UBI_ROOTFS:/boot/uImage. u-boot will load 1.7M from ubifs. -- Best Regards Xiangfu -- Qi RSS feed, http://en.qi-hardware.com/feed/rss20.xml -- _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
