I made a few changes in the ben-blinkenlights project: - moved the avrdude/ directory from under uart/ to the top level, i.e., it's now called ben-blinkenlights/avrdude/ instead of ben-blinkenlights/uart/avrdude/
Note: this changes the location of the patches as well. - "UART" is an overly generic name, so I renamed the UART sub-project to NXUART (usually lower-case). NXUART was chosen by a fair 3:1 vote on #qi-hardware and stands for "NanoNote External UART" - I added an option the NanoNote driver for avrdude to output a clock on the 8:10 card interface. This is useful for AVRs that are expected to operate in general with an external clock, e.g., supplied from the NanoNote. The syntax is -x clk=N where N is the desired clock frequency in MHz, where N has to be an integer. I also changed the NXUART project to set the clock selection fuse to the external clock and to make use of avrdude's new ability. Note that the name change also affects the name of the programmer definition (in avrdude.conf) for NXUART: it is now called nanonote_nxuart - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
