Hi Ernest Kugel you have to give one parameter to patch-openwrt.sh which is the openwrt-xburst dir $../openwrt-xburst.patches/README-patch-openwrt.sh ./ or $../openwrt-xburst.patches/README-patch-openwrt.sh ~/openwrt-xburst
==== if you want compile the RELEASE image. you need those patches. and the steps is under openwrt-xburst run $ git checkout release_2011-02-23" $ wget http://downloads.qi-hardware.com/software/images/NanoNote/Ben/latest/feeds.conf $ ./scripts/feeds update -a && ./scritps/feeds install -a $ cd feeds/qipackages/ && git checkout release_2011-02-23 $ wget "http://downloads.qi-hardware.com/software/images/NanoNote/Ben/latest/config"; -O .config then you can start to make. check here: http://en.qi-hardware.com/wiki/Building_Software_Image#Building_OpenWrt_base_on_release_files ==== if you want compile base on latest openwrt-xburst.git, you don't need those patches any more. http://en.qi-hardware.com/wiki/Building_Software_Image#Building_OpenWrt_on_last_git_commmit On 04/23/2011 07:34 AM, Ernest Kugel wrote: > Hi guys, non of the patches in the Patches step of Building Software > Image seems to be properly applied. I must be doing something wrong, > or is this normal? > > The patches are stored in ~/openwrt-xburst.patches/ > > and I'm running # ../openwrt-xburst.patches/README-patch-openwrt.sh > > from within the ~/openwrt-xburst directory. > > Here's the log: ... -- Best Regards Xiangfu -- Qi RSS feed, http://en.qi-hardware.com/feed/rss20.xml -- _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
