Another reason for the error might be that the window created by ascii-paint is too big. What is the maximum resolution supported by the Ben Nanonote? ascii-paint creates a window with a size of 640x400. You can get a window of 320x200 if you replace the terminal.png with a smaller font such as this: http://i.imgur.com/3FPql.png. Try replacing terminal.png with the one I linked and see if that helps.
Shafqat On Fri, Apr 22, 2011 at 5:40 PM, Xiangfu Liu <[email protected]> wrote: > Hi Jice, Shafqat Bhuiyan > > thanks for support Ben Nanonote. now I can success compile the > 'ascii-paint' > the source codes for openwrt is here: > http://qi-hw.com/p/openwrt-packages/ba3ac45 > > I am using the "libtcod-r522", using svn checkout the revision r522, since > the > 1.5.0 source code tarball don't have the 'makefiles'. > > but I have some problem on running it: > root@BenNanoNote:/usr/lib/ascii-paint# ls > ascii-paint ascii-paint.cfg terminal.png > root@BenNanoNote:/usr/lib/ascii-paint# ./ascii-paint > libtcod 1.5.0 > SDL : cannot create window <--- The ERROR message. > > installed three file of libtcod: > root@BenNanoNote:/usr/lib/ascii-paint# ls /usr/lib/libtcod* > /usr/lib/libtcod.so /usr/lib/libtcodgui.so /usr/lib/libtcodxx.so > > I can sure the SDL libs in nanonote works fine. there are some of apps > using SDL. > > thanks for the cmake, no needs patch the makefile now :) > > On 04/22/2011 11:33 AM, Shafqat Bhuiyan wrote: > > Hi, > > > > I tried compiling ascii-paint using libtcod 1.5 and there were some > > problems. So I fixed them up and uploaded a new version of ascii-paint on > > the website: > > > http://code.google.com/p/ascii-paint/downloads/detail?name=ascii-paint-0.3.1.tar.gz > > > > This version also uses cmake so it should be easier to compile. >
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
