Hello. Six atusb sticks should be on the way to me now and will hopefully arrive end of this week or early next week. :)
The plan it to use them as an easy plug and play interface for adding a linux notebook to a IEEE 802.15.4 based sensor network. I've seen that Werner have the communication running between two atben boards but I'm wondering what the driver and firmware status is for the atusb boards. Have a, say dirtpan with ssh, connection between a linux pc and a atben been tested already? Trying to estimate the work here I have to do to get the board runing. I already worked, and still working, with the ieee802154 stack and its drivers and the basic AT86RF231 driver seem to work just fine as the video shows. What bothered me a bit is how far the split out of the transport part into spi and usb and the firmware counterpart is already. I was not able to find much informations about this part. What I have seen from the git repo there have been work for a platform-specific reset function and some groundwork for the split, but no actual code that lets me drive the atusb board. Is there any git/patch I mised? Looking forward to hack on it. regards Stefan Schmidt _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
