AWESOME !!! I confirm too it works.
On Sat, Aug 20, 2011 at 01:32:40PM +0400, kyak wrote: > Wow, wow, wow! > > Just tried it with "/usr/bin/poke 0x10003024 0". > The reaction to On button is instantanious!!! > > Xiangfu, how about putting this to our start script? > Bas, this is absolutely awesome, thank you! > > On Wed, 17 Aug 2011, Bas Wijnen wrote: > > >Andrea Bolognani schreef op wo 17-08-2011 om 12:17 [+0200]: > >>Hold on a second: either I’m utterly mistaken, or the kernel is still far > >>from being kicked in when the power button is pressed. > > > >That is correct. But the delay is made by the rtc, which can be set up > >when the kernel is running. It will retain its value as long as the rtc > >has power (that is, when you remove the battery, you lose both the > >current time and this setting). > > > >> I always assumed > >>the circuitry needed that delay, and it was not avoidable. > > > >It is avoidable, and I don't see a reason to use it. > > > >>Are you telling me that I’ve been wrong the whole time, and that it is > >>possible to achieve instant—boot making changes to the software only? > > > >Yes. If the kernel sets the rtc register, it will instant-boot from then > >on, until the power on the rtc goes down (which should never happen). > > > >I propose to write the rtc register on every boot, so that even if the > >battery was removed and the setting was lost, it still only results in > >the delay once. > > > >I'm talking about register HWFCR, page 131 of the programmer's manual. > >Writing 0 to this register (0x10003024) will remove the delay. > > > >Thanks, > >Bas > > > > > > > >_______________________________________________ > >Qi Hardware Discussion List > >Mail to list (members only): [email protected] > >Subscribe or Unsubscribe: > >http://lists.en.qi-hardware.com/mailman/listinfo/discussion > _______________________________________________ > Qi Hardware Discussion List > Mail to list (members only): [email protected] > Subscribe or Unsubscribe: > http://lists.en.qi-hardware.com/mailman/listinfo/discussion
signature.asc
Description: Digital signature
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
